caa a22 4500 44538462X CHVBK 20180317143028.0 cr unu---uuuuu 170323e20110301xx s 000 0 eng 10.1007/s10924-010-0219-7 doi (NATIONALLICENCE)springer-10.1007/s10924-010-0219-7 Tensile, Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment [Elektronische Daten] [P. Noorunnisa Khanam, H. Abdul Khalil, G. Ramachandra Reddy, S. Venkata Naidu] In this study, effect of fibre surface treatment on tensile, flexural and chemical resistance properties were studied for sisal fibre reinforced composites. Natural ligno cellulosic sisal fibre reinforced composites were prepared by different surface treatments by hand lay-up method. Fibre surface treatments were carried out to produce good interface between the fibre and the matrix to improve the mechanical properties. Fibre surface treatments were done by boiled the sisal fibres in different % of NaOH and treated the fibres in different % of NaOH, treated in acetic acid and methanol. Unsaturated polyester resin was used as the matrix for preparing the composites. For comparison, these properties for untreated sisal fibre reinforced composites were also studied. From the results it was observed that 18% aqueous NaOH boiled sisal fibre reinforced composites have higher tensile, flexural properties than other composites. Untreated sisal fibre composites show lower properties than treated composites. Chemical resistance properties indicate that all sisal fibre reinforced composites are resistance to all chemicals except carbon tetra chloride. The tests are carried out as per the ASTM standards. Springer Science+Business Media, LLC, 2010 Sisal fibre nationallicence Surface treatment nationallicence Tensile properties nationallicence Flexural properties nationallicence Chemical resistance properties nationallicence Noorunnisa Khanam P. Division of Bioresource Technology, School of Industrial Technology, University Science Malaysia, 11800, Penang, Malaysia aut Abdul Khalil H. Division of Bioresource Technology, School of Industrial Technology, University Science Malaysia, 11800, Penang, Malaysia aut Ramachandra Reddy G. Department of Polymer Science and Technology, Srikrishnadevaraya University, 515003, Anantapur, Andhra Pradesh, India aut Venkata Naidu S. Department of Polymer Science and Technology, Srikrishnadevaraya University, 515003, Anantapur, Andhra Pradesh, India aut Journal of Polymers and the Environment Springer US; http://www.springer-ny.com 19/1(2011-03-01), 115-119 1566-2543 19:1<115 2011 19 10924 https://doi.org/10.1007/s10924-010-0219-7 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10924-010-0219-7 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Noorunnisa Khanam P. Division of Bioresource Technology, School of Industrial Technology, University Science Malaysia, 11800, Penang, Malaysia aut NATIONALLICENCE 700 1- Abdul Khalil H. Division of Bioresource Technology, School of Industrial Technology, University Science Malaysia, 11800, Penang, Malaysia aut NATIONALLICENCE 700 1- Ramachandra Reddy G. Department of Polymer Science and Technology, Srikrishnadevaraya University, 515003, Anantapur, Andhra Pradesh, India aut NATIONALLICENCE 700 1- Venkata Naidu S. Department of Polymer Science and Technology, Srikrishnadevaraya University, 515003, Anantapur, Andhra Pradesh, India aut NATIONALLICENCE 773 0- Journal of Polymers and the Environment Springer US; http://www.springer-ny.com 19/1(2011-03-01), 115-119 1566-2543 19:1<115 2011 19 10924 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer