caa a22 4500 445843993 CHVBK 20180317145353.0 cr unu---uuuuu 170323e20110601xx s 000 0 eng 10.1007/s11085-010-9231-5 doi (NATIONALLICENCE)springer-10.1007/s11085-010-9231-5 Analysis of Deformed Oxide Layers Grown on Steel [Elektronische Daten] [Lucía Suárez, Pablo Rodríguez-Calvillo, Yvan Houbaert, Nelson Garza-Montes-de-Oca, Rafael Colás] The deformation of the oxide layer grown in ultra low carbon steel was studied by means of electron backscattered diffraction analyses. Samples of the steel were reheated for shorts periods of time at 1050°C in a chamber designed to obtain thin scale layers before deforming them by plane strain compression at temperatures ranging from 650 to 1050°C. Microstructural analyses showed that the oxide layer was made almost exclusively of wustite that is ductile when deformed above 900°C. It is found that wustite develops texture components of the cube and rotated cube type while growing; these components rotate towards〈201〉{100} components once a certain degree of deformation is achieved. Undeformed ferrite close to the oxide layer shows weak 〈201〉{100} components that rotate into weak rotated cube components when the substrate is deformed in the austenite range and to strong〈554〉{225} components when deformed in ferrite. Rolling trials carried out in an experimental mill showed similar trends. Springer Science+Business Media, LLC, 2011 Oxidation nationallicence Deformation nationallicence Steel nationallicence Electron backscattered diffraction nationallicence Suárez Lucía CTM—Technologic Centre, Materials Technology Area, Manresa, Barcelona, Spain aut Rodríguez-Calvillo Pablo CTM—Technologic Centre, Materials Technology Area, Manresa, Barcelona, Spain aut Houbaert Yvan Department of Materials Science and Engineering, University of Ghent, Ghent, Belgium aut Garza-Montes-de-Oca Nelson Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Monterrey, Mexico aut Colás Rafael Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Monterrey, Mexico aut Oxidation of Metals Springer-Verlag 75/5-6(2011-06-01), 281-295 0030-770X 75:5-6<281 2011 75 11085 https://doi.org/10.1007/s11085-010-9231-5 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s11085-010-9231-5 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Suárez Lucía CTM—Technologic Centre, Materials Technology Area, Manresa, Barcelona, Spain aut NATIONALLICENCE 700 1- Rodríguez-Calvillo Pablo CTM—Technologic Centre, Materials Technology Area, Manresa, Barcelona, Spain aut NATIONALLICENCE 700 1- Houbaert Yvan Department of Materials Science and Engineering, University of Ghent, Ghent, Belgium aut NATIONALLICENCE 700 1- Garza-Montes-de-Oca Nelson Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Monterrey, Mexico aut NATIONALLICENCE 700 1- Colás Rafael Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Monterrey, Mexico aut NATIONALLICENCE 773 0- Oxidation of Metals Springer-Verlag 75/5-6(2011-06-01), 281-295 0030-770X 75:5-6<281 2011 75 11085 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer