caa a22 4500 46317254X CHVBK 20180406164817.0 cr unu---uuuuu 170326e20070301xx s 000 0 eng 10.1007/s10717-007-0026-3 doi (NATIONALLICENCE)springer-10.1007/s10717-007-0026-3 Adaptive control of diamond drilling of nonmetallic materials [Elektronische Daten] [A. Balykov, Yu. Serdobintsev, L. Listunov] The basic principles for selecting the work regimes for diamond drilling of nonmetallic materials are presented. The process of microcutting by a single diamond grain is examined, and relations between the components of the cutting force and the ratio of the rate of the main motion to the feed rate are obtained on the basis of known relationships. It is shown that adaptive control of the drilling nonmetallic materials is possible using two-circuit systems — one for feed-rate control and one for cutting-rate. Springer Science+Business Media, Inc., 2007 Balykov A. Moscow State Technical University "Stankin,”, Moscow, Russia aut Serdobintsev Yu Moscow State Technical University "Stankin,”, Moscow, Russia aut Listunov L. Moscow State Technical University "Stankin,”, Moscow, Russia aut Glass and Ceramics Springer US 64/3-4(2007-03-01), 99-101 0361-7610 64:3-4<99 2007 64 10717 https://doi.org/10.1007/s10717-007-0026-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10717-007-0026-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Balykov A. Moscow State Technical University "Stankin,”, Moscow, Russia aut NATIONALLICENCE 700 1- Serdobintsev Yu Moscow State Technical University "Stankin,”, Moscow, Russia aut NATIONALLICENCE 700 1- Listunov L. Moscow State Technical University "Stankin,”, Moscow, Russia aut NATIONALLICENCE 773 0- Glass and Ceramics Springer US 64/3-4(2007-03-01), 99-101 0361-7610 64:3-4<99 2007 64 10717 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer