caa a22 4500 463187814 CHVBK 20180406164859.0 cr unu---uuuuu 170326e20070401xx s 000 0 eng 10.1007/s10973-006-8108-y doi (NATIONALLICENCE)springer-10.1007/s10973-006-8108-y Effectof autoclaving temperature on calcium silicate-based building products containingclay-brick waste [Elektronische Daten] [H. Connan, A. Ray, P. Thomas, J.-P. Guerbois] The utilisation of fired clay-brick waste is of interest in the manufacture of building products due to both socio-economic and technological reasons. Autoclaving is an established process for manufacturing calcium silicate-based building products that affords rapid strength development. Clay-brick waste represents a source of alternative silica, which is more reactive than conventionally used silica and also contains alumina. This paper presents data on the effect of lowering the autoclaving temperature from commonly practised 180 to 170°C on OPC-quartz blends containing clay-brick fines as direct replacement of quartz at 4.3, 8.6 and 12.9 mass percentages. The hydration products of autoclaved OPC-quartz blends with clay-brick fines were characterised using simultaneous DTA-TG in combination with other methods. Springer-Verlag, 2007 autoclaving nationallicence clay-brick waste nationallicence Portland cement nationallicence thermal analysis nationallicence tobermorite nationallicence Connan H. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut Ray A. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut Thomas P. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut Guerbois J.-P Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut Journal of Thermal Analysis and Calorimetry Kluwer Academic Publishers 88/1(2007-04-01), 115-119 1388-6150 88:1<115 2007 88 10973 https://doi.org/10.1007/s10973-006-8108-y text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10973-006-8108-y text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Connan H. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut NATIONALLICENCE 700 1- Ray A. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut NATIONALLICENCE 700 1- Thomas P. Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut NATIONALLICENCE 700 1- Guerbois J.-P Department of Chemistry, Materials and Forensic Science, University of Technology, Broadway NSW, 2007, PO Box 123, Sydney, Australia aut NATIONALLICENCE 773 0- Journal of Thermal Analysis and Calorimetry Kluwer Academic Publishers 88/1(2007-04-01), 115-119 1388-6150 88:1<115 2007 88 10973 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer