caa a22 4500 463191099 CHVBK 20180406164909.0 cr unu---uuuuu 170326e20070701xx s 000 0 eng 10.1007/s10973-006-7917-3 doi (NATIONALLICENCE)springer-10.1007/s10973-006-7917-3 Determination of rapeseed methyl ester oil volumetric properties in high pressure (0.1 to 350 MPa) [Elektronische Daten] [C. Aparicio, B. Guignon, L. Rodríguez-Antón, P. Sanz] The isothermal compressibility coefficient, the bulk modulus, the cubic expansion coefficient, the density and the propagation speed of the pressure waves of rapeseed methyl ester oil (RMEO) are the thermophysical properties derived from the specific volume determined in this work and compared with the properties of diesel oil (DO). The temperature measurement interval ranges from 288.15 to 328.15 K and the pressure measurement interval from atmospheric pressure to 350 MPa. The experimental method used consisted of a volume change cell characterised by a linear variable differential transformer (LVDT) magnetic induction system adapted to a high-pressure vessel. To calculate the properties the modified Tait-Tammann equation was used and a high correlation coefficient was obtained with a 95% confidence level. The specific volume and compressibility coefficient were greater for DO than for RMEO; also, cubic expansion was greater for DO than for RMEO. These results pave the way for further practical application. Springer Science+Business Media LLC, 2007 bulk modulus nationallicence cubic expansion coefficient nationallicence density nationallicence diesel oil nationallicence high pressure nationallicence isothermal compressibility nationallicence rapeseed methyl ester oil nationallicence specific volume nationallicence speed of pressure waves nationallicence Aparicio C. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut Guignon B. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut Rodríguez-Antón L. Industrial Mechanical Department, E.U.I.T.I. Universidad Politécnica, 28012, Madrid, Spain aut Sanz P. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut Journal of Thermal Analysis and Calorimetry Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 89/1(2007-07-01), 13-19 1388-6150 89:1<13 2007 89 10973 https://doi.org/10.1007/s10973-006-7917-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10973-006-7917-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Aparicio C. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut NATIONALLICENCE 700 1- Guignon B. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut NATIONALLICENCE 700 1- Rodríguez-Antón L. Industrial Mechanical Department, E.U.I.T.I. Universidad Politécnica, 28012, Madrid, Spain aut NATIONALLICENCE 700 1- Sanz P. Engineering Department, Instituto Del Frío, CSIC, 28040, Madrid, Spain aut NATIONALLICENCE 773 0- Journal of Thermal Analysis and Calorimetry Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 89/1(2007-07-01), 13-19 1388-6150 89:1<13 2007 89 10973 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer