caa a22 4500 463223616 CHVBK 20180405153220.0 cr unu---uuuuu 170326e20071001xx s 000 0 eng 10.1007/s10853-007-1795-3 doi (NATIONALLICENCE)springer-10.1007/s10853-007-1795-3 Effects of particle size and structure of carbon blacks on the abrasion of filled elastomer compounds [Elektronische Daten] [Chang Hong, Hyunsung Kim, Changseok Ryu, Changwoon Nah, Yang-il Huh, Shinyoung Kaang] The effects of the particle size and structure of various carbon blacks on friction and abrasion behavior of filled natural rubber (NR), styrene-butadiene rubber (SBR) and polybutadiene (BR) compounds were investigated using a modified blade abrader. The effect of particle size and structure on abrasion resistance should be considered for the optimum design of desired wear properties. Characteristic parameters were introduced from the particle size and the structure of carbon blacks, with a linear relationship between the Young's modulus and these characteristic parameters. The frictional coefficient depended not only on the particle size, but also on the structure of carbon black. The rates of abrasion were decreased with increasing surface area and developing structure of carbon blacks. Abrasion rates of the compounds were found to be proportional to a power n of the applied frictional work input. It was also observed that BR compounds caused much slower wear than NR and SBR compounds. The worn surfaces of the rubber compounds filled with carbon black having smaller particle size and a more developed structure showed narrower spaced ridges and better abrasion resistance. It means that smaller particle size and better structure development of carbon black resulted in improved abrasion resistance. Springer Science+Business Media, LLC, 2007 Hong Chang School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut Kim Hyunsung School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut Ryu Changseok School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut Nah Changwoon Department of Polymer Nano Science and Technology, Chonbuk National University, Chonju, Korea aut Huh Yang-il School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut Kaang Shinyoung School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut Journal of Materials Science Springer US; http://www.springer-ny.com 42/20(2007-10-01), 8391-8399 0022-2461 42:20<8391 2007 42 10853 https://doi.org/10.1007/s10853-007-1795-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-007-1795-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Hong Chang School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut NATIONALLICENCE 700 1- Kim Hyunsung School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut NATIONALLICENCE 700 1- Ryu Changseok School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut NATIONALLICENCE 700 1- Nah Changwoon Department of Polymer Nano Science and Technology, Chonbuk National University, Chonju, Korea aut NATIONALLICENCE 700 1- Huh Yang-il School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut NATIONALLICENCE 700 1- Kaang Shinyoung School of Applied Chemical Engineering, Chonnam National University, Gwangju, Korea aut NATIONALLICENCE 773 0- Journal of Materials Science Springer US; http://www.springer-ny.com 42/20(2007-10-01), 8391-8399 0022-2461 42:20<8391 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer