caa a22 4500 463225147 CHVBK 20180405153224.0 cr unu---uuuuu 170326e20070601xx s 000 0 eng 10.1007/s10853-006-0644-0 doi (NATIONALLICENCE)springer-10.1007/s10853-006-0644-0 Intermetallic Fe x Al y -phases in a steel/Al-alloy fusion weld [Elektronische Daten] [Leonardo Agudo, Dominique Eyidi, Christian Schmaranzer, Enno Arenholz, Nasrin Jank, Jürgen Bruckner, Anke Pyzalla] The microstructure of joints between an Al-alloy and a zinc coated ferritic steel sheet manufactured by the so-called CMT joining method is investigated. The joint consists of a weld between the Al-alloy and Al 99.8 filler and a brazing of the filler to the zinc coated steel. The morphology, the structure and the defects of the intermetallic phases that developed at the interface between the steel and the Al 99.8 filler are characterised using scanning and transmission electron microscopy. The intermetallic phase seam is only about 2.3μm thick and consists of trapezoidal nearly equiaxial Fe2Al5 grains surrounded by finger-like remains of the steel and mostly elliptical FeAl3 grains extending into the Al 99.8 filler material. Both the Fe2Al5 and the FeAl3 grains contain crystal defects. Springer Science+Business Media, LLC, 2007 Agudo Leonardo TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut Eyidi Dominique TU Wien, University Service for Transmission Electron Microscopy, Wiedner Haupstrasse 8-10, 1040, Vienna, Austria aut Schmaranzer Christian Voestalpine Stahl GmbH, Voestalpine-Straße 3, 4020, Linz, Austria aut Arenholz Enno Voestalpine Stahl GmbH, Voestalpine-Straße 3, 4020, Linz, Austria aut Jank Nasrin TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut Bruckner Jürgen Fronius International, Sparte Schweißtechnik, Buxbaumstrasse 2, 4600, Wels, Austria aut Pyzalla Anke TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/12(2007-06-01), 4205-4214 0022-2461 42:12<4205 2007 42 10853 https://doi.org/10.1007/s10853-006-0644-0 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-0644-0 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Agudo Leonardo TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut NATIONALLICENCE 700 1- Eyidi Dominique TU Wien, University Service for Transmission Electron Microscopy, Wiedner Haupstrasse 8-10, 1040, Vienna, Austria aut NATIONALLICENCE 700 1- Schmaranzer Christian Voestalpine Stahl GmbH, Voestalpine-Straße 3, 4020, Linz, Austria aut NATIONALLICENCE 700 1- Arenholz Enno Voestalpine Stahl GmbH, Voestalpine-Straße 3, 4020, Linz, Austria aut NATIONALLICENCE 700 1- Jank Nasrin TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut NATIONALLICENCE 700 1- Bruckner Jürgen Fronius International, Sparte Schweißtechnik, Buxbaumstrasse 2, 4600, Wels, Austria aut NATIONALLICENCE 700 1- Pyzalla Anke TU Wien, Institute of Material Science and Technology, Karlsplatz 13-308, 1040, Vienna, Austria aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/12(2007-06-01), 4205-4214 0022-2461 42:12<4205 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer