caa a22 4500 46322549X CHVBK 20180405153225.0 cr unu---uuuuu 170326e20070601xx s 000 0 eng 10.1007/s10853-006-0641-3 doi (NATIONALLICENCE)springer-10.1007/s10853-006-0641-3 Interfacial stress transfer of fiber pullout for carbon nanotubes with a composite coating [Elektronische Daten] [Toshiaki Natsuki, Feng Wang, Q. Ni, Morinobu Endo] An analytical approach has been established to evaluate the interfacial stress transfer characteristics of single- and multi-walled carbon nanotubes (CNTs) with composite coatings by means of fiber pullout model. According to the present model, the effects of several parameters such as coating thickness, layer numbers and dimension of CNTs on interfacial stress transfers were investigated and analyzed. The results suggested that the maximum interfacial shear stress occurred at the pullout end of CNTs and decreased with increasing coating thickness as well as CNT wall thickness (layer numbers). Moreover, the distribution of the interfacial shear and coating axial stress along the CNT length was found to be largely affected by the friction coefficient in the interface between the CNT and the coating layer. Springer Science+Business Media, LLC, 2007 Natsuki Toshiaki Faculty of Textile Science & Technology, Shinshu University, 3-15-1 Tokida, 386-8567, Ueda-shi, Japan aut Wang Feng Faculty of Engineering, Shinshu University, Wakasato 4-17-1, 380-8553, Nagano-shi, Japan aut Ni Q. Faculty of Textile Science & Technology, Shinshu University, 3-15-1 Tokida, 386-8567, Ueda-shi, Japan aut Endo Morinobu Faculty of Engineering, Shinshu University, Wakasato 4-17-1, 380-8553, Nagano-shi, Japan aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/12(2007-06-01), 4191-4196 0022-2461 42:12<4191 2007 42 10853 https://doi.org/10.1007/s10853-006-0641-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-0641-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Natsuki Toshiaki Faculty of Textile Science & Technology, Shinshu University, 3-15-1 Tokida, 386-8567, Ueda-shi, Japan aut NATIONALLICENCE 700 1- Wang Feng Faculty of Engineering, Shinshu University, Wakasato 4-17-1, 380-8553, Nagano-shi, Japan aut NATIONALLICENCE 700 1- Ni Q. Faculty of Textile Science & Technology, Shinshu University, 3-15-1 Tokida, 386-8567, Ueda-shi, Japan aut NATIONALLICENCE 700 1- Endo Morinobu Faculty of Engineering, Shinshu University, Wakasato 4-17-1, 380-8553, Nagano-shi, Japan aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/12(2007-06-01), 4191-4196 0022-2461 42:12<4191 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer