caa a22 4500 463225902 CHVBK 20180405153226.0 cr unu---uuuuu 170326e20071101xx s 000 0 eng 10.1007/s10853-007-1920-3 doi (NATIONALLICENCE)springer-10.1007/s10853-007-1920-3 Influence of novel additive on BMI resin and BMI resin matrix composite [Elektronische Daten] [B. Zhang, M. Li, X. Chen] In order to achieve high performance BMI matrix composite manufactured by vacuum bag cure only technique, a novel additive WD-01 was selected to modify BMI-B resin based on modified polyetherketone (PEK-C) toughened 4,4′-bismaleimidodiphenyl methane (MBMI)/O,O′-diallybisphenol A (DABPA) system, and the properties of WD-01 modified BMI resin (BMI-WD) and resin matrix composite were investigated here. Results indicated that the cure shrinkage rate of BMI-B resin was reduced from original 4.0% to 1.8% and the surface morphology of neat resin casting were changed significantly by incorporating 1wt.% WD-01, no change of chemical cure behavior of BMI resin was observed. Vacuum consolidated BMI-WD/T700 laminates had autoclave cure quality with excellent mechanical properties. A high performance of vacuum-bag curable prepreg with promising characteristics is being developed and expected to find use in advanced composite structures. Springer Science+Business Media, LLC, 2007 Zhang B. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut Li M. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut Chen X. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut Journal of Materials Science Springer US; http://www.springer-ny.com 42/22(2007-11-01), 9170-9175 0022-2461 42:22<9170 2007 42 10853 https://doi.org/10.1007/s10853-007-1920-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-007-1920-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Zhang B. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut NATIONALLICENCE 700 1- Li M. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut NATIONALLICENCE 700 1- Chen X. Beijing Institute of Aeronautical Materials, P.O. Box 81-12, 100095, Beijing, P.R. China aut NATIONALLICENCE 773 0- Journal of Materials Science Springer US; http://www.springer-ny.com 42/22(2007-11-01), 9170-9175 0022-2461 42:22<9170 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer