caa a22 4500 463228391 CHVBK 20180405153234.0 cr unu---uuuuu 170326e20070901xx s 000 0 eng 10.1007/s10853-007-1538-5 doi (NATIONALLICENCE)springer-10.1007/s10853-007-1538-5 Impact of metal filler on the dielectric properties of Nylon 11 [Elektronische Daten] [S. Pande, D. Kelkar, D. Peshwe] Dielectric measurements of pure Nylon 11 in comparison with metal (Zn) filled Nylon 11 have been carried out using an impendence analyzer in the frequency range of 102-107Hz and temperature range 20-120°C. Two different concentrations (1% and 5% (w/w)) of metal (Zn) fillers were used. It was observed that at low frequencies and particularly at high temperature dielectric permittivity (ε′) for 1% Zn filled sample is more than that of pure Nylon 11 whereas ε′ for 5% Zn filler is less as compared to that for pure Nylon 11. But at very high frequencies dielectric permittivity (ε′) for pure Nylon 11 is less than Zn filled samples. Also it is found that for all frequencies and particularly at high temperature ε′′ as well as tanδ are maximum for pure Nylon 11 and decrease for filled Nylon 11 samples. The Cole-Cole arcs have also been plotted for these samples. Using these plots the static and instantaneous values of dielectric permittivity and orientation polarization parameter ‘S' have been calculated. Springer Science+Business Media, LLC, 2007 Pande S. Material Engineering Centre, Visvesvaraya National Institute of Technology, VNIT Campus, Bajaj Nagar, 440011, Nagpur, Maharashtra, India aut Kelkar D. Department of Physics, Institute of Science, 440 001, Nagpur, India aut Peshwe D. Material Engineering Centre, Visvesvaraya National Institute of Technology, VNIT Campus, Bajaj Nagar, 440011, Nagpur, Maharashtra, India aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/17(2007-09-01), 7324-7330 0022-2461 42:17<7324 2007 42 10853 https://doi.org/10.1007/s10853-007-1538-5 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-007-1538-5 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Pande S. Material Engineering Centre, Visvesvaraya National Institute of Technology, VNIT Campus, Bajaj Nagar, 440011, Nagpur, Maharashtra, India aut NATIONALLICENCE 700 1- Kelkar D. Department of Physics, Institute of Science, 440 001, Nagpur, India aut NATIONALLICENCE 700 1- Peshwe D. Material Engineering Centre, Visvesvaraya National Institute of Technology, VNIT Campus, Bajaj Nagar, 440011, Nagpur, Maharashtra, India aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/17(2007-09-01), 7324-7330 0022-2461 42:17<7324 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer