caa a22 4500 463229312 CHVBK 20180405153237.0 cr unu---uuuuu 170326e20070701xx s 000 0 eng 10.1007/s10853-006-0742-z doi (NATIONALLICENCE)springer-10.1007/s10853-006-0742-z The behaviour of iron and aluminium during the diffusion welding of carbon steel to aluminium [Elektronische Daten] [M. Karfoul, Gordon Tatlock, Robert Murray] The diffusion welding of carbon steel to aluminium may be achieved when the temperature and compression of the weld metal allows diffusion at the interface between both components; the degree of interdiffusion largely determines the quality of the welded joint. Such diffusion processes can take place under vacuum. However, in this paper, we report that high quality welds can be achieved without the use of vacuum or reducing atmospheres by applying sufficient compression to give very high levels of plastic deformation of an Al layer sandwiched between layers of carbon steel at 550°C in laboratory air. The resulting structures were characterised using scanning electron microscopy, transmission electron microscopy and microanalysis, which showed that, under these conditions, Fe diffused across the interface into the Al layer. Springer Science+Business Media, LLC, 2007 Karfoul M. Faculty of Chemical & Petroleum Engineering, Al-Baath University, P.O. Box 1173, Homs, Syria aut Tatlock Gordon Department of Engineering, Materials Science, The University of Liverpool, L69 3GH, Liverpool, UK aut Murray Robert Department of Engineering, Materials Science, The University of Liverpool, L69 3GH, Liverpool, UK aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/14(2007-07-01), 5692-5699 0022-2461 42:14<5692 2007 42 10853 https://doi.org/10.1007/s10853-006-0742-z text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-0742-z text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Karfoul M. Faculty of Chemical & Petroleum Engineering, Al-Baath University, P.O. Box 1173, Homs, Syria aut NATIONALLICENCE 700 1- Tatlock Gordon Department of Engineering, Materials Science, The University of Liverpool, L69 3GH, Liverpool, UK aut NATIONALLICENCE 700 1- Murray Robert Department of Engineering, Materials Science, The University of Liverpool, L69 3GH, Liverpool, UK aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/14(2007-07-01), 5692-5699 0022-2461 42:14<5692 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer