caa a22 4500 463231074 CHVBK 20180405153242.0 cr unu---uuuuu 170326e20070301xx s 000 0 eng 10.1007/s10853-006-0967-x doi (NATIONALLICENCE)springer-10.1007/s10853-006-0967-x Processing and properties of ultrafine-grain aluminum alloy 5005 sheet [Elektronische Daten] [R. Lapovok, P. McKenzie, P. Thomson, S. Semiatin] The potential of ECAP sheet machine build in Monash University to refine the grain size, enhance mechanical properties, and improve deep drawability of the sheet was investigated for a representative aluminum alloy, AA5005. The annealed sheet was subjected to one, two, or four ECAP passes through 90º using route A or route C followed by annealing at 400 °C for 15 min. It was established that only one ECAP pass is required to obtain a significant improvement in both normal and planar anisotropy. A subsequent annealing enabled the recovery of ductility of the material lost during ECAP while maintaining the improved plastic anisotropy. Springer Science+Business Media, LLC, 2006 Lapovok R. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut McKenzie P. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut Thomson P. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut Semiatin S. Air Force Research Laboratory, Materials and Manufacturing Directorate, AFRL/MLLM, 45433-7817, Wright-Patterson Air Force Base, OH, USA aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/5(2007-03-01), 1649-1659 0022-2461 42:5<1649 2007 42 10853 https://doi.org/10.1007/s10853-006-0967-x text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-0967-x text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Lapovok R. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut NATIONALLICENCE 700 1- McKenzie P. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut NATIONALLICENCE 700 1- Thomson P. Materials Engineering Department, Monash University, 3800, Clayton, Victoria, Australia aut NATIONALLICENCE 700 1- Semiatin S. Air Force Research Laboratory, Materials and Manufacturing Directorate, AFRL/MLLM, 45433-7817, Wright-Patterson Air Force Base, OH, USA aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/5(2007-03-01), 1649-1659 0022-2461 42:5<1649 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer