caa a22 4500 463233336 CHVBK 20180405153249.0 cr unu---uuuuu 170326e20070701xx s 000 0 eng 10.1007/s10853-006-0577-7 doi (NATIONALLICENCE)springer-10.1007/s10853-006-0577-7 Mechanical properties of glass fibre reinforced polypropylene disks produced by rotating, expansion and compression injection moulding [Elektronische Daten] [Cristina Silva, Júlio Viana, Ferrie van Hattum, António Cunha] A special mould (RCEM, rotation, compression and expansion mould) intended for inducing complex stress fields during the filling stage of injection moulding was used to manipulate the microstructure of a short fibre reinforced polypropylene. Centred gated discs were injection moulded with different filling sequences (stationary, expansion, compression, expansion with continuous rotation and compression with continuous rotation). The mechanical behaviour of the mouldings was characterized in tensile and flexural loadings on specimens cut at different locations along the flow length. Complete discs were also tested in 4-point support flexural test at low velocity and at impact. The respective results are analysed and discussed in terms of the developed fibre orientation morphology. Springer Science+Business Media, LLC, 2007 Silva Cristina Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut Viana Júlio Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut van Hattum Ferrie Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut Cunha António Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/13(2007-07-01), 5203-5216 0022-2461 42:13<5203 2007 42 10853 https://doi.org/10.1007/s10853-006-0577-7 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-0577-7 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Silva Cristina Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut NATIONALLICENCE 700 1- Viana Júlio Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut NATIONALLICENCE 700 1- van Hattum Ferrie Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut NATIONALLICENCE 700 1- Cunha António Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058, Guimaraes, Portugal aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/13(2007-07-01), 5203-5216 0022-2461 42:13<5203 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer