caa a22 4500 463233905 CHVBK 20180405153250.0 cr unu---uuuuu 170326e20070601xx s 000 0 eng 10.1007/s10853-006-1301-3 doi (NATIONALLICENCE)springer-10.1007/s10853-006-1301-3 Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy [Elektronische Daten] [P. Pérez, G. Garcés, P. Adeva] In the present work the influence of texture on the mechanical properties up to 500°C of commercially pure magnesium prepared by PM was determined. Extrusion of magnesium powders was carried out between 250 and 450 °C. All extruded materials exhibited an intense fibre texture with the basal planes parallel to the extrusion direction whose intensity increased in line with the extrusion temperature. The microstructure consisted of highly elongated magnesium powder particles. All the materials presented a heterogeneous grain size resulting from the size distribution of the original magnesium powder particles. In addition, small MgO particles were found mainly decorating the original powder boundaries. The best mechanical properties corresponded to the materials extruded at 400 and 450°C. This behaviour was associated particularly with the intense fibre texture of these materials. Springer Science+Business Media, LLC, 2007 Pérez P. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut Garcés G. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut Adeva P. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/11(2007-06-01), 3969-3976 0022-2461 42:11<3969 2007 42 10853 https://doi.org/10.1007/s10853-006-1301-3 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10853-006-1301-3 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Pérez P. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut NATIONALLICENCE 700 1- Garcés G. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut NATIONALLICENCE 700 1- Adeva P. Centro Nacional de Investigaciones Metalúrgicas (CSIC), Avda. Gregorio del Amo 8, 28020, Madrid, Spain aut NATIONALLICENCE 773 0- Journal of Materials Science Kluwer Academic Publishers-Plenum Publishers; http://www.springer-ny.com 42/11(2007-06-01), 3969-3976 0022-2461 42:11<3969 2007 42 10853 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer