caa a22 4500 465797903 CHVBK 20180323112043.0 cr unu---uuuuu 170327e19900101xx s 000 0 eng 10.1007/BF00796103 doi (NATIONALLICENCE)springer-10.1007/BF00796103 Cracking resistance and strength of carbide steels [Elektronische Daten] [Ya. Kyubarsepp, Kh. Annuka, Kh. Reshetnyak, A. Maistrenko, G. Chepovetskii] Conclusions: The carbide steels with binders of austenitic or austenitic-martensitic steels have high cracking resistance which is not inferior to that of the tungsten carbide hard alloys (at the same volume content of the metallic phase). This can be explained by high ductility of the binder of these materials. There is a relationship between cracking resistance and certain properties of the carbide steels, such as hardness, proof stress, and the limiting plastic strain in compression: a reduction of HV, σ0.1, and an increase of ɛ1 are accompanied by an increase of K1c. Consequently, it is possible to evaluate the cracking resistance on the basis of these available and relatively easy to determine mechanical properties. Plenum Publishing Corporation, 1990 Kyubarsepp Ya Tallin Polytechnical Institute, USSR aut Annuka Kh Tallin Polytechnical Institute, USSR aut Reshetnyak Kh Tallin Polytechnical Institute, USSR aut Maistrenko A. Tallin Polytechnical Institute, USSR aut Chepovetskii G. Tallin Polytechnical Institute, USSR aut Soviet Powder Metallurgy and Metal Ceramics Kluwer Academic Publishers-Plenum Publishers 29/1(1990-01-01), 83-87 0038-5735 29:1<83 1990 29 11106 https://doi.org/10.1007/BF00796103 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00796103 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Kyubarsepp Ya Tallin Polytechnical Institute, USSR aut NATIONALLICENCE 700 1- Annuka Kh Tallin Polytechnical Institute, USSR aut NATIONALLICENCE 700 1- Reshetnyak Kh Tallin Polytechnical Institute, USSR aut NATIONALLICENCE 700 1- Maistrenko A. Tallin Polytechnical Institute, USSR aut NATIONALLICENCE 700 1- Chepovetskii G. Tallin Polytechnical Institute, USSR aut NATIONALLICENCE 773 0- Soviet Powder Metallurgy and Metal Ceramics Kluwer Academic Publishers-Plenum Publishers 29/1(1990-01-01), 83-87 0038-5735 29:1<83 1990 29 11106 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer