caa a22 4500 467913854 CHVBK 20180406152856.0 cr unu---uuuuu 170328e20061201xx s 000 0 eng 10.1007/s10999-007-9037-z doi (NATIONALLICENCE)springer-10.1007/s10999-007-9037-z Optimization for friction welding parameters with multiple performance characteristics [Elektronische Daten] [Paulraj Sathiya, S. Aravindan, A. Noorul Haq] Friction Welding is a variation of pressure welding method. Though some experience has already been accumulated in the industrial application of friction welding, achieving the optimal processing parameters is still a difficult task. This work is putting a step forward to achieve the best possible design. This paper presents an investigation on the optimization and the effect of welding parameters on multiple performance characteristics (tensile strength and the metal loss) obtained by friction welded joints. A plan of experiments based on the Taguchi method was designed. The output variables were the tensile strength and metal loss of the weld. These output variables were determined according to the input variables, which are the Heating Pressure (HP), Heating Time (HT), Upsetting Pressure (UP) and Upsetting Time (UT). The main objectives of this study are maximization of tensile strength and minimization of metal loss. By statistical analysis, an optimal level of combination of processing parameters is achieved. To validate the optimization, experience were conducted at optimum parameters. Springer Science+Business Media B.V., 2007 ANOVA nationallicence Friction welding nationallicence Metal loss nationallicence Microstructure studies nationallicence Orthogonal array nationallicence Taguchi method nationallicence Tensile strength nationallicence Sathiya Paulraj Department of Production Engineering, National Institute of Technology, 620 015, Tiruchirappalli, Tamilnadu, India aut Aravindan S. Department of Mechanical Engineering, Indian Institute of Technology Delhi, 110 016, New Delhi, India aut Noorul Haq A. Department of Production Engineering, National Institute of Technology, 620 015, Tiruchirappalli, Tamilnadu, India aut International Journal of Mechanics and Materials in Design Springer Netherlands 3/4(2006-12-01), 309-318 1569-1713 3:4<309 2006 3 10999 https://doi.org/10.1007/s10999-007-9037-z text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s10999-007-9037-z text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Sathiya Paulraj Department of Production Engineering, National Institute of Technology, 620 015, Tiruchirappalli, Tamilnadu, India aut NATIONALLICENCE 700 1- Aravindan S. Department of Mechanical Engineering, Indian Institute of Technology Delhi, 110 016, New Delhi, India aut NATIONALLICENCE 700 1- Noorul Haq A. Department of Production Engineering, National Institute of Technology, 620 015, Tiruchirappalli, Tamilnadu, India aut NATIONALLICENCE 773 0- International Journal of Mechanics and Materials in Design Springer Netherlands 3/4(2006-12-01), 309-318 1569-1713 3:4<309 2006 3 10999 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer