caa a22 4500 46798090X CHVBK 20180323112518.0 cr unu---uuuuu 170328e19900101xx s 000 0 eng 10.1007/BF00780421 doi (NATIONALLICENCE)springer-10.1007/BF00780421 Effect of aging and plastic strain on the mechanical properties of high manganese steel [Elektronische Daten] [I. Kleshcheva, E. Shur] Conclusion: 1. Aging of high-manganese 110G13L steel at temperatures from 200 to 400°C permits to increase its ultimate strength without changing the yield stress, while plastic properties, and the semibrittleness temperature T50 slightly decrease. Aging at temperatures above 400°C leads to sharp reduction of σB, ψ, δ and T50. 2. After fractional loading of the 110G13L steel at temperatures of 20-250°C an increase of σ0.2 and σB is achieved; the plastic properties decrease in cold strain while in thermal strain they do not change. 3. The process of plastic strain of the 110G13L steel with subsequent aging causes an increase of strength properties without reducing plasticity. Apparently this takes place on account of the separation during aging of dispersed particles along the slip planes, produced by preliminary deformation. Plenum Publishing Corporation, 1990 Kleshcheva I. aut Shur E. aut Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/1(1990-01-01), 30-34 0026-0673 32:1<30 1990 32 11041 https://doi.org/10.1007/BF00780421 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00780421 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Kleshcheva I. aut NATIONALLICENCE 700 1- Shur E. aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/1(1990-01-01), 30-34 0026-0673 32:1<30 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer