caa a22 4500 467981205 CHVBK 20180323112519.0 cr unu---uuuuu 170328e19900601xx s 000 0 eng 10.1007/BF01100155 doi (NATIONALLICENCE)springer-10.1007/BF01100155 Surface induction hardening of Minsk Automobile Plant truck final gears [Elektronische Daten] [P. Gurchenko, V. Bykov, Yu. Shumakov] Conclusions: Continuous induction hardening of gears with movement of their tooth surface with a varied rate relative to the inductor, which is located parallel to the generatrix, makes it possible to provide a uniform hardened case depth on the contour of the tooth surface of 1.0-2.2 mm and a high surface hardness of 56-62 HRCeq for 40, 40Kh, and 30KhGSA steels with low residual deformation. The process is characterized by high production effectiveness. Plenum Publishing Corporation, 1990 Gurchenko P. aut Bykov V. aut Shumakov Yu aut Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/6(1990-06-01), 406-411 0026-0673 32:6<406 1990 32 11041 https://doi.org/10.1007/BF01100155 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF01100155 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Gurchenko P. aut NATIONALLICENCE 700 1- Bykov V. aut NATIONALLICENCE 700 1- Shumakov Yu aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/6(1990-06-01), 406-411 0026-0673 32:6<406 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer