caa a22 4500 46798123X CHVBK 20180323112519.0 cr unu---uuuuu 170328e19900601xx s 000 0 eng 10.1007/BF01100166 doi (NATIONALLICENCE)springer-10.1007/BF01100166 Semenov V. aut Effect of molten solder on the formation of stress concentrations in alloy KhN67MVTYu during soldering [Elektronische Daten] [V. Semenov] Conclusions: 1. Molten solder causes a reduction in the mechanical properties of alloy KhN67MVTYu as a result of embrittling it and occurrence in it of local stress concentrations. 2. In order to reduce the probability of crack development in the alloy and failure of structures during soldering it is necessary to limit its contact with molten solder by barrier coatings or using solder with a melting temperature close to that of the single-phase state of the metal; in this way the reduction in strength will be insignificant. Plenum Publishing Corporation, 1990 Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/6(1990-06-01), 447-449 0026-0673 32:6<447 1990 32 11041 https://doi.org/10.1007/BF01100166 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF01100166 text/html Onlinezugriff via DOI NATIONALLICENCE 100 1- Semenov V. aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/6(1990-06-01), 447-449 0026-0673 32:6<447 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer