caa a22 4500 467981922 CHVBK 20180323112521.0 cr unu---uuuuu 170328e19900301xx s 000 0 eng 10.1007/BF00730921 doi (NATIONALLICENCE)springer-10.1007/BF00730921 Structure and mechanical properties of graphitized low-carbon steel with working [Elektronische Daten] [G. Bel'chenko, A. Shevtsov, A. Prikhod'ko] Conclusions: 1. The mechanical properties of steel 18YuA in the original condition are determined by the amount of cementite globules and graphite inclusions with a certain size of them. Steel with graphite inclusions exhibits greater ductility and lower strength properties. 2. Graphite inclusions commensurate in size with cementite globules (with d<1 μm) do not cause a reduction in the mechanical properties of cold-worked steel. With a reduction of more than 30% these properties of steel 18YuA with graphite inclusions and without them are almost the same. 3. Under the action of working graphite inclusions are drawn out along the rolling direction. With an increase in reduction there is merging of inclusions close together with formation of lines having a length up to 0.2 mm. Lines of graphite inclusions n steel 18YuA initiate crack generation and growth during subsequent working. Plenum Publishing Corporation, 1990 Bel'chenko G. aut Shevtsov A. aut Prikhod'ko A. aut Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/3(1990-03-01), 193-196 0026-0673 32:3<193 1990 32 11041 https://doi.org/10.1007/BF00730921 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00730921 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Bel'chenko G. aut NATIONALLICENCE 700 1- Shevtsov A. aut NATIONALLICENCE 700 1- Prikhod'ko A. aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/3(1990-03-01), 193-196 0026-0673 32:3<193 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer