caa a22 4500 467982457 CHVBK 20180323112522.0 cr unu---uuuuu 170328e19900801xx s 000 0 eng 10.1007/BF00700721 doi (NATIONALLICENCE)springer-10.1007/BF00700721 Effect of heating by electric current and external heating on the structure of aluminum wire [Elektronische Daten] [E. Rossinskaya, B. Stepanov, V. Sandler, T. Nikol'skaya] Conclusions: 1. A change in the structure over the length of the wire, beginning at the terminal, is a basic structural indication of current overload; there is no coarse-grain segment in the vicinity of the burn zone. 2. The magnitude of the overload can be estimated by comparing the distances from the terminal to the segments with the recrystallized structure and (or) burn; the higher the overload, the smaller these distances. 3. A coarse recrystallized grain near the burn zone and an extended region with a partially recrystallized structure are indications of local external heating. 4. A finer grain in the burn zone as compared with the coarse-grain structure of the recrystallization zone is an indication of an overload that precedes heating to 600°C. Plenum Publishing Corporation, 1991 Rossinskaya E. aut Stepanov B. aut Sandler V. aut Nikol'skaya T. aut Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/8(1990-08-01), 631-634 0026-0673 32:8<631 1990 32 11041 https://doi.org/10.1007/BF00700721 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00700721 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Rossinskaya E. aut NATIONALLICENCE 700 1- Stepanov B. aut NATIONALLICENCE 700 1- Sandler V. aut NATIONALLICENCE 700 1- Nikol'skaya T. aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/8(1990-08-01), 631-634 0026-0673 32:8<631 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer