caa a22 4500 467982538 CHVBK 20180323112522.0 cr unu---uuuuu 170328e19900801xx s 000 0 eng 10.1007/BF00700704 doi (NATIONALLICENCE)springer-10.1007/BF00700704 Phase and structural transformations in deformation and heat treatment of 08Kh15N5D2T steel tubing [Elektronische Daten] [N. Zvigintsev, V. Yushkov, M. Khadyev, I. Konakova] Conclusion: Annealing in the intercritical area of the α→γ-transformation or hardening from a continuous furnace with subsequent tempering in the α→γ-transformation range included in the production plan for cold-rolled 08Kh15N5D2T tubing do not restore the original workability of the steel since the residual austenite is stabilized toward the γ→α-transformation in deformation. Annealing at 650°C does not lead to complete recrystallization and detexturing of the metal. To obtain this it is recommended that rapid electric heating for hardening with subsequent tempering be introduced into the production plan for rolling of tubing. Plenum Publishing Corporation, 1991 Zvigintsev N. aut Yushkov V. aut Khadyev M. aut Konakova I. aut Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/8(1990-08-01), 559-564 0026-0673 32:8<559 1990 32 11041 https://doi.org/10.1007/BF00700704 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00700704 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Zvigintsev N. aut NATIONALLICENCE 700 1- Yushkov V. aut NATIONALLICENCE 700 1- Khadyev M. aut NATIONALLICENCE 700 1- Konakova I. aut NATIONALLICENCE 773 0- Metal Science and Heat Treatment Kluwer Academic Publishers-Plenum Publishers 32/8(1990-08-01), 559-564 0026-0673 32:8<559 1990 32 11041 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer