caa a22 4500 469090456 CHVBK 20180323133015.0 cr unu---uuuuu 170328e19920201xx s 000 0 eng 10.1007/BF00779261 doi (NATIONALLICENCE)springer-10.1007/BF00779261 Optimum design of cylindrical pressure vessels taking account of autofretting [Elektronische Daten] [V. Stolbov, V. Ashikhmin] Two statements are given for the problem of optimum design of cylindrical pressure vessels taking account of autofretting. The first statement assumes successive solution of two optimization problems. First the optimum residual stress distribution is determined with which strength restrictions are fulfilled for a cylinder of minimum thickness. Then the optimum autofretting pressure is found with which residual stress curves are close to the optimum according to a certain standard. The second statement does not require an iteration procedure and its makes it possible immediately to determine the optimum autofretting pressure corresponding to the minimum permissible cylinder thickness. The results obtained are compared. Possibilities are demonstrated for strengthening cylindrical pressure vessels by means of the autofretting process. Plenum Publishing Corporation, 1992 Stolbov V. Polytechnic Institute, Perm aut Ashikhmin V. Polytechnic Institute, Perm aut Strength of Materials Kluwer Academic Publishers-Plenum Publishers 24/2(1992-02-01), 212-217 0039-2316 24:2<212 1992 24 11223 https://doi.org/10.1007/BF00779261 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00779261 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Stolbov V. Polytechnic Institute, Perm aut NATIONALLICENCE 700 1- Ashikhmin V. Polytechnic Institute, Perm aut NATIONALLICENCE 773 0- Strength of Materials Kluwer Academic Publishers-Plenum Publishers 24/2(1992-02-01), 212-217 0039-2316 24:2<212 1992 24 11223 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer