caa a22 4500 475798244 CHVBK 20180406123730.0 cr unu---uuuuu 170329e20000701xx s 000 0 eng 10.1007/s001700070036 doi (NATIONALLICENCE)springer-10.1007/s001700070036 IDEF0 Model of the Measurement Planning for a Workpiece Machined by a Machining Centre [Elektronische Daten] [Z.-C. Lin, C.-Z. Lin] A comprehensive analysis of the entire measuring operation for a workpiece machined by a machining centre should be conducted systematically before the application of a planning technique. For this purpose, an IDEF0 model is used in this paper to plan the measuring sequence and operation of a coordinate measuring system for a workpiece machined by a machining centre. Generally speaking, a machining centre can machine workpieces having complicated shapes. Therefore, the planning of measurement procedures and operations on a workpiece machined by a machine centre requires consideration of issues such as the position and measuring sequence of the measurement points, how to avoid probe collision during measuring, which fixture elements are required for measuring fixtures, and where the support points of fixtures and position of fixture locations should be.: Springer-Verlag London Limited, 2000 Keywords: IDEF0 nationallicence Machining centre nationallicence Lin Z.-C Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, TW aut Lin C.-Z Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, TW aut https://doi.org/10.1007/s001700070036 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s001700070036 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Lin Z.-C Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, TW aut NATIONALLICENCE 700 1- Lin C.-Z Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, TW aut Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer