caa a22 4500 477091660 CHVBK 20180405111516.0 cr unu---uuuuu 170330e19960901xx s 000 0 eng 10.1007/BF00488111 doi (NATIONALLICENCE)springer-10.1007/BF00488111 The effect of burning temperature on the structural changes of Woodceramics [Elektronische Daten] [Toshihiro Okabe, Kouji Saito, Kazuo Hokkirigawa] Woodceramics are new porous carbon materials obtained by burning wood or woody material impregnated with thermosetting resin in a vacuum furnace. In this paper, the effect of burning temperature on the structural changes of Woodceramics is analyzed experimentally. Woodceramics were prepared using medium density fiberboard which was burned at temperatures less than 1000°C in a charcoal kiln. A drastic decrease in dimensions and weight was observed at temperatures lower than 600°C but they decreased gradually at temperatures higher than 600°C. Reproducibility of dimensions and weight by burning is possible. When Woodceramics were prepared by burning at higher than 1600°C by high frequency induction furnace, dimensions and weight decreased due to transformation of amorphous carbon to graphite, but the porous structure of wood remains unchanged. The distribution of glassy carbon and amorphous carbon was difficult to decipher after graphitization by observation with SEM and X-ray diffraction analysis. Kluwer Academic Publishers, 1996 woodceramics nationallicence porous carbon nationallicence glassy carbon nationallicence burning temperature nationallicence structural change nationallicence Okabe Toshihiro Industrial Research Institute of Aomori Prefecture, 80 Fukuromachi, 036, Hirosaki, Japan aut Saito Kouji Industrial Research Institute of Aomori Prefecture, 80 Fukuromachi, 036, Hirosaki, Japan aut Hokkirigawa Kazuo Department of Mechanical Systems Engineering, Faculty of Engineering, Yamagata University, 992, Yonezawa, Japan aut Journal of Porous Materials Springer Netherlands 2/3(1996-09-01), 215-221 1380-2224 2:3<215 1996 2 10934 https://doi.org/10.1007/BF00488111 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/BF00488111 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Okabe Toshihiro Industrial Research Institute of Aomori Prefecture, 80 Fukuromachi, 036, Hirosaki, Japan aut NATIONALLICENCE 700 1- Saito Kouji Industrial Research Institute of Aomori Prefecture, 80 Fukuromachi, 036, Hirosaki, Japan aut NATIONALLICENCE 700 1- Hokkirigawa Kazuo Department of Mechanical Systems Engineering, Faculty of Engineering, Yamagata University, 992, Yonezawa, Japan aut NATIONALLICENCE 773 0- Journal of Porous Materials Springer Netherlands 2/3(1996-09-01), 215-221 1380-2224 2:3<215 1996 2 10934 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer