naa a22 4500 51076584X CHVBK 20180411083156.0 cr unu---uuuuu 180411e20131201xx s 000 0 eng 10.1007/s11630-013-0669-z doi (NATIONALLICENCE)springer-10.1007/s11630-013-0669-z Research on the response characteristics of solenoid valve of the air-jet loom by simulation [Elektronische Daten] [Yuzhen Jin, Ruoyu Deng, Yingzi Jin, Xudong Hu] Solenoid valve is one of the executive parts of weft insertion control system. According to the response characteristics of the solenoid valve, an improved design becomes a necessity. Firstly, the numerical model was established after analyzing the solenoid valve during its start-up and shut-down. Comparing the simulation data with the practical data, it is verified that the numerical simulation model has a high feasibility. Secondly, excitation voltage and spring pre-compression were adjusted respectively, and the response rules after adjusting were investigated. The research of the study shows: the response time tends to be inverse proportional to the excitation voltage during start-up, and it becomes a constant value with the increase of the excitation voltage; the response time is proportional to the spring pre-compression when the solenoid valve starts up, it is inverse proportional to spring pre-compression when the solenoid valve shuts down. And the total response time is a constant value with the increase of the spring pre-compression. Therefore, the value of the excitation voltage and the spring pre-compression should be selected when the curve is becoming flatten. The results of the research can provide the reference to the further development of the solenoid valve. Science Press, Institute of Engineering Thermophysics, CAS and Springer-Verlag Berlin Heidelberg, 2013 Air-jet loom nationallicence Solenoid valve nationallicence Numerical simulation nationallicence Response speed nationallicence Jin Yuzhen Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut Deng Ruoyu Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut Jin Yingzi Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut Hu Xudong Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut Journal of Thermal Science Springer Berlin Heidelberg 22/6(2013-12-01), 606-612 1003-2169 22:6<606 2013 22 11630 https://doi.org/10.1007/s11630-013-0669-z text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s11630-013-0669-z text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Jin Yuzhen Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut NATIONALLICENCE 700 1- Deng Ruoyu Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut NATIONALLICENCE 700 1- Jin Yingzi Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut NATIONALLICENCE 700 1- Hu Xudong Faculty of Mechanical Engineering & Automation, Zhejiang Sci-Tech University, 310018, Hangzhou, Zhejiang, China aut NATIONALLICENCE 773 0- Journal of Thermal Science Springer Berlin Heidelberg 22/6(2013-12-01), 606-612 1003-2169 22:6<606 2013 22 11630 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer