naa a22 4500 510790690 CHVBK 20180411092757.0 cr unu---uuuuu 180411e20130301xx s 000 0 eng 10.1007/s12289-011-1067-2 doi (NATIONALLICENCE)springer-10.1007/s12289-011-1067-2 On the self-piercing riveting of aluminium blanks and carbon fibre composite panels [Elektronische Daten] [Giuseppe Di Franco, Livan Fratini, Antonino Pasta, Vincenzo Ruisi] In the present paper the possibility to join aluminium alloys blanks and carbon fibre composites panels by self-piercing riveting operation is considered. In particular a few case studies were carried out at the varying of the process parameters. The effectiveness of the obtained joints was tested through tensile tests and through fatigue ones; what is more the process mechanics was highlighted through proper macro and micro observations of the transverse sections of the joints. The failure mechanics of the obtained joints were also considered in order to highlight the mechanisms which occur and determine the lost of the load carrying capability of the joints. Finally a numerical model of the process was carried out and the residual stress state after piercing was highlighted. The developed experiments and simulations demonstrated that self-piercing riveting can be effectively used to join carbon fiber composite panels and aluminum blanks. Springer-Verlag France, 2011 Self-piercing riveting nationallicence Hybrid joints nationallicence Failure nationallicence Carbon fiber nationallicence Di Franco Giuseppe Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut Fratini Livan Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut Pasta Antonino Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut Ruisi Vincenzo Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut International Journal of Material Forming Springer-Verlag 6/1(2013-03-01), 137-144 1960-6206 6:1<137 2013 6 12289 https://doi.org/10.1007/s12289-011-1067-2 text/html Onlinezugriff via DOI 1 review-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s12289-011-1067-2 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Di Franco Giuseppe Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut NATIONALLICENCE 700 1- Fratini Livan Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut NATIONALLICENCE 700 1- Pasta Antonino Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut NATIONALLICENCE 700 1- Ruisi Vincenzo Department of Industrial Engineering, University of Palermo, Viale delle Scienze, 90128, Palermo, Italy aut NATIONALLICENCE 773 0- International Journal of Material Forming Springer-Verlag 6/1(2013-03-01), 137-144 1960-6206 6:1<137 2013 6 12289 Metadata rights reserved Springer special CC-BY-NC licence nationallicence SWISSBIB 445005947 BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer