naa a22 4500 510790844 CHVBK 20180411083319.0 cr unu---uuuuu 180411e20130901xx s 000 0 eng 10.1007/s12289-012-1095-6 doi (NATIONALLICENCE)springer-10.1007/s12289-012-1095-6 On the influence of deformation rate and cooling media on the static strain aging of a warm-rolled low carbon steel [Elektronische Daten] [Behrad Koohbor, Donya Ohadi] An investigation was performed on the static strain aging behavior of warm-rolled low carbon steel during a nearly 1-year aging period, from the view point concerning with influence of changing the deformation speed and cooling media. Mechanical response of the examined material during aging period was evaluated through variations occurred in strength and hardness of the warm-deformed steel. It was shown that changing the rolling speed as well as cooling rate, may result in the occurrence of different metallurgical phenomena, consequently altering the aging kinetics of the material. It was also found that by increasing rolling speed, an increase in the value of hardness and UTS takes place, while changing the cooling rate to a higher value can cause a more considerable variation in the mechanical behavior of warm-rolled samples throughout the aging period. From the industrial point of view, the experiments conducted in this work is in agreement with the practical conditions of high temperature rolling processes with long interpass times, such as Steckel rolling process. Springer-Verlag France, 2012 Warm rolling nationallicence Static strain aging nationallicence Rolling speed nationallicence Cooling rate nationallicence Koohbor Behrad Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran aut Ohadi Donya School of Metallurgical and Materials Engineering, University of Tehran, Tehran, Iran aut International Journal of Material Forming Springer Paris 6/3(2013-09-01), 417-422 1960-6206 6:3<417 2013 6 12289 https://doi.org/10.1007/s12289-012-1095-6 text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s12289-012-1095-6 text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Koohbor Behrad Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran aut NATIONALLICENCE 700 1- Ohadi Donya School of Metallurgical and Materials Engineering, University of Tehran, Tehran, Iran aut NATIONALLICENCE 773 0- International Journal of Material Forming Springer Paris 6/3(2013-09-01), 417-422 1960-6206 6:3<417 2013 6 12289 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer