naa a22 4500 510807003 CHVBK 20180411083423.0 cr unu---uuuuu 180411e20130101xx s 000 0 eng 10.1007/s11548-012-0744-z doi (NATIONALLICENCE)springer-10.1007/s11548-012-0744-z An electromagnetic "Tracker-in-Table” configuration for X-ray fluoroscopy and cone-beam CT-guided surgery [Elektronische Daten] [J. Yoo, S. Schafer, A. Uneri, Y. Otake, A. Khanna, J. Siewerdsen] Purpose: A novel electromagnetic tracking configuration was characterized and implemented for image-guided surgery incorporating C-arm fluoroscopy and/or cone-beam CT (CBCT). The tracker employed a field generator (FG) with an open rectangular aperture and a frame enclosure with two essentially hollow sides, yielding a design that presents little or no X-ray attenuation across the C-arm orbit. The "Window” FG (WFG) was characterized in comparison with a conventional "Aurora” FG (AFG), and a configuration in which the WFG was incorporated directly into the operating table was investigated in preclinical phantom studies. Method: The geometric accuracy and field of view (FOV) of the WFG and AFG were evaluated in terms of target registration error (TRE) using an acrylic phantom on an (electromagnetic compatible) experimental bench. The WFG design was incorporated in a prototype operating table featuring a carbon fiber top beneath, which the FG could be translated for positioning under the patient. The X-ray compatibility was evaluated using a prototype mobile C-arm for fluoroscopy and CBCT in an anthropomorphic chest phantom. The susceptibility to EM field distortion associated with surgical tools (e.g., spine screws) and the C-arm itself was investigated in terms of TRE, and calibration methods were tested to provide robust image-world registration with minimal perturbation from the rotational C-arm. Results: The WFG demonstrated mean TRE of 1.28 ± 0.79mm compared to 1.13 ± 0.72mm for the AFG, with no statistically significant difference between the two (p=0.32 and n=250). The WFG exhibited a deeper field of view by ~10cm providing an equivalent degree of geometric accuracy to a depth of z ~55cm, compared to z ~45cm for the AFG. Although the presence of a small number of spine screws did not degrade tracker accuracy, the mobile C-arm perturbed the electromagnetic field sufficiently to degrade TRE; however, a calibration method was identified to mitigate the effect. Specifically, the average calibration between posterior-anterior and lateral orientations of the C-arm was found to yield fairly robust registration for any C-arm pose with only a slight reduction in geometric accuracy (1.43 ± 0.31mm in comparison with 1.28 ± 0.79mm, p=0.05). The WFG demonstrated reasonable X-ray compatibility, although the initial design of the window frame included suboptimal material and shape of the side bars that caused a level of streak artifacts in CBCT reconstructions. The streak artifacts were of sufficient magnitude to degrade soft-tissue visibility in CBCT but were negligible in the context of high-contrast imaging tasks (e.g., bone visualization). Conclusion: The open frame of the WFG offers a potentially valuable configuration for electromagnetic trackers in image-guided surgery applications that are based on X-ray fluoroscopy and/or CBCT. The geometric accuracy and FOV are comparable to the conventional AFG and offers increased depth (z-direction) FOV. Incorporation directly within the operating table offers a streamlined implementation in which the tracker is in place but "invisible,” potentially simplifying tableside logistics, avoidance of the sterile field, and compatibility with X-ray imaging. CARS, 2012 Surgical navigation nationallicence Intraoperative imaging nationallicence CBCT nationallicence Spine surgery nationallicence Electromagnetic tracking nationallicence Tracking accuracy nationallicence Image quality nationallicence Yoo J. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut Schafer S. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut Uneri A. Department of Computer Science, The Johns Hopkins University, Baltimore, MD, USA aut Otake Y. Department of Computer Science, The Johns Hopkins University, Baltimore, MD, USA aut Khanna A. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut Siewerdsen J. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut International Journal of Computer Assisted Radiology and Surgery Springer-Verlag 8/1(2013-01-01), 1-13 1861-6410 8:1<1 2013 8 11548 https://doi.org/10.1007/s11548-012-0744-z text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s11548-012-0744-z text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Yoo J. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 700 1- Schafer S. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 700 1- Uneri A. Department of Computer Science, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 700 1- Otake Y. Department of Computer Science, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 700 1- Khanna A. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 700 1- Siewerdsen J. Department of Biomedical Engineering, The Johns Hopkins University, Baltimore, MD, USA aut NATIONALLICENCE 773 0- International Journal of Computer Assisted Radiology and Surgery Springer-Verlag 8/1(2013-01-01), 1-13 1861-6410 8:1<1 2013 8 11548 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer