naa a22 4500 510823106 CHVBK 20180411083543.0 cr unu---uuuuu 180411e20131201xx s 000 0 eng 10.1007/s12541-013-0281-x doi (NATIONALLICENCE)springer-10.1007/s12541-013-0281-x Development of doubly salient permanent magnet linear synchronous motor for general-purpose automation applications [Elektronische Daten] [Shi-Uk Chung, Jong-Moo Kim, Byung-Chul Woo, Do-Kwan Hong, Ji-Young Lee] This paper introduces a comprehensive approach to the development of doubly salient permanent magnet linear synchronous motor (DSPMLSM) including design, analysis, optimization, and experimental validation. Due to the proposed reduction design, force ripple caused by end-effect is dramatically reduced without any auxiliary teeth on both ends of mover. Response surface methodology (RSM) combined with 2D finite element analysis (FEA) is performed to maximize rated thrust. A prototype was made based on the analysis and tested to confirm the validity of the analysis. The comparison between analysis and experiment shows an excellent agreement. Controllabilty of the prototype is also examined to show applicability in general-purpose automation applications. It is experimentally shown that the proposed DSPMLSM topology successfully achieve high acceleration, high speed, and high precision positioning capability. Korean Society for Precision Engineering and Springer-Verlag Berlin Heidelberg, 2013 Consequent pole nationallicence Detent force nationallicence Doubly salient nationallicence Force ripple reduction nationallicence Linear motor nationallicence Chung Shi-Uk Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut Kim Jong-Moo Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut Woo Byung-Chul Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut Hong Do-Kwan Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut Lee Ji-Young Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut International Journal of Precision Engineering and Manufacturing Springer Berlin Heidelberg 14/12(2013-12-01), 2075-2080 2234-7593 14:12<2075 2013 14 12541 https://doi.org/10.1007/s12541-013-0281-x text/html Onlinezugriff via DOI 1 research-article jats NATIONALLICENCE 856 40 https://doi.org/10.1007/s12541-013-0281-x text/html Onlinezugriff via DOI NATIONALLICENCE 700 1- Chung Shi-Uk Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut NATIONALLICENCE 700 1- Kim Jong-Moo Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut NATIONALLICENCE 700 1- Woo Byung-Chul Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut NATIONALLICENCE 700 1- Hong Do-Kwan Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut NATIONALLICENCE 700 1- Lee Ji-Young Electric Motor Research Center, Korea Electrotechnology Research Institute, 642-120, Changwon, South Korea aut NATIONALLICENCE 773 0- International Journal of Precision Engineering and Manufacturing Springer Berlin Heidelberg 14/12(2013-12-01), 2075-2080 2234-7593 14:12<2075 2013 14 12541 Metadata rights reserved Springer special CC-BY-NC licence nationallicence BK010053 XK010053 XK010000 NATIONALLICENCE NATIONALLICENCE NL-springer