The use of neural networks for CPT-based liquefaction screening
Gespeichert in:
Verfasser / Beitragende:
[Yusuf Erzin, Nurhan Ecemis]
Ort, Verlag, Jahr:
2015
Enthalten in:
Bulletin of Engineering Geology and the Environment, 74/1(2015-02-01), 103-116
Format:
Artikel (online)
Online Zugang:
| LEADER | caa a22 4500 | ||
|---|---|---|---|
| 001 | 605453772 | ||
| 003 | CHVBK | ||
| 005 | 20210128100203.0 | ||
| 007 | cr unu---uuuuu | ||
| 008 | 210128e20150201xx s 000 0 eng | ||
| 024 | 7 | 0 | |a 10.1007/s10064-014-0606-8 |2 doi |
| 035 | |a (NATIONALLICENCE)springer-10.1007/s10064-014-0606-8 | ||
| 245 | 0 | 4 | |a The use of neural networks for CPT-based liquefaction screening |h [Elektronische Daten] |c [Yusuf Erzin, Nurhan Ecemis] |
| 520 | 3 | |a This study deals with development of two different artificial neural network (ANN) models: one for predicting cone penetration resistance and the other for predicting liquefaction resistance. For this purpose, cone penetration numerical simulations and cyclic triaxial tests conducted on Ottawa sand-silt mixes at different fines content were used. Results obtained from ANN models were compared with simulation and experimental results and found close to them. In addition, the performance indices such as coefficient of determination, root mean square error, mean absolute error, and variance were used to check the prediction capacity of the ANN models developed. Both ANN models have shown a high prediction performance based on the performance indices. It has been demonstrated that the ANN models developed in this study can be employed for predicting cone penetration and liquefaction resistances of sand-silt mixes quite efficiently. | |
| 540 | |a Springer-Verlag Berlin Heidelberg, 2014 | ||
| 690 | 7 | |a Artificial neural networks |2 nationallicence | |
| 690 | 7 | |a Cone penetration resistance |2 nationallicence | |
| 690 | 7 | |a Liquefaction resistance |2 nationallicence | |
| 690 | 7 | |a Ottowa sand |2 nationallicence | |
| 700 | 1 | |a Erzin |D Yusuf |u Department of Civil Engineering, Faculty of Engineering, Celal Bayar University, 45140, Manisa, Turkey |4 aut | |
| 700 | 1 | |a Ecemis |D Nurhan |u Department of Civil Engineering, Faculty of Engineering, Izmir Institute of Technology, 35430, Izmir, Turkey |4 aut | |
| 773 | 0 | |t Bulletin of Engineering Geology and the Environment |d Springer Berlin Heidelberg |g 74/1(2015-02-01), 103-116 |x 1435-9529 |q 74:1<103 |1 2015 |2 74 |o 10064 | |
| 856 | 4 | 0 | |u https://doi.org/10.1007/s10064-014-0606-8 |q text/html |z Onlinezugriff via DOI |
| 898 | |a BK010053 |b XK010053 |c XK010000 | ||
| 900 | 7 | |a Metadata rights reserved |b Springer special CC-BY-NC licence |2 nationallicence | |
| 908 | |D 1 |a research-article |2 jats | ||
| 949 | |B NATIONALLICENCE |F NATIONALLICENCE |b NL-springer | ||
| 950 | |B NATIONALLICENCE |P 856 |E 40 |u https://doi.org/10.1007/s10064-014-0606-8 |q text/html |z Onlinezugriff via DOI | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Erzin |D Yusuf |u Department of Civil Engineering, Faculty of Engineering, Celal Bayar University, 45140, Manisa, Turkey |4 aut | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Ecemis |D Nurhan |u Department of Civil Engineering, Faculty of Engineering, Izmir Institute of Technology, 35430, Izmir, Turkey |4 aut | ||
| 950 | |B NATIONALLICENCE |P 773 |E 0- |t Bulletin of Engineering Geology and the Environment |d Springer Berlin Heidelberg |g 74/1(2015-02-01), 103-116 |x 1435-9529 |q 74:1<103 |1 2015 |2 74 |o 10064 | ||