caa a22 4500 606194924 CHVBK 20210128100916.0 cr unu---uuuuu 210128e20151201xx s 000 0 eng 10.1007/s10934-015-0048-0 doi (NATIONALLICENCE)springer-10.1007/s10934-015-0048-0 Altınkök Necat Department of Machine and Metal Technologies, Hendek Vocational School, Sakarya University, 54300, Hendek, Sakarya, Turkey aut Investigation of mechanical and machinability properties of Al2O3/SiCp reinforced Al-based composite fabricated by stir cast technique [Elektronische Daten] [Necat Altınkök] The paper presents the results of experimental investigation on mechanical and machinability properties of A332-Al2O3/SiCp reinforced using varying size of particles up to 53μm by a vortex method was carried out at different cutting conditions. Experiments were carried out with TiN (K10) coated carbide tools and TP30 coated carbide tools at various cutting speeds The influence of reinforced ratios of 10wt% of Al2O3/SiCp on mechanical properties was examined. The effect of machining parameters, e.g. cutting speed, feed rate and depth of cut on flank wear land and surface roughness was studied. It was observed that decreased with increasing the particle size produced better mechanical properties such as tensile strength and hardness, but wear showed different trend; increased with decreasing the particle size. Machinability properties of the selected material were studied and with increasing the particle size surface roughness was generally affected by feed rate and cutting speed. Springer Science+Business Media New York, 2015 Composites production nationallicence Mechanical properties nationallicence Machinability properties nationallicence Journal of Porous Materials Springer US; http://www.springer-ny.com 22/6(2015-12-01), 1643-1654 1380-2224 22:6<1643 2015 22 10934 https://doi.org/10.1007/s10934-015-0048-0 text/html Onlinezugriff via DOI BK010053 XK010053 XK010000 Metadata rights reserved Springer special CC-BY-NC licence nationallicence 1 research-article jats NATIONALLICENCE NATIONALLICENCE NL-springer NATIONALLICENCE 856 40 https://doi.org/10.1007/s10934-015-0048-0 text/html Onlinezugriff via DOI NATIONALLICENCE 100 1- Altınkök Necat Department of Machine and Metal Technologies, Hendek Vocational School, Sakarya University, 54300, Hendek, Sakarya, Turkey aut NATIONALLICENCE 773 0- Journal of Porous Materials Springer US; http://www.springer-ny.com 22/6(2015-12-01), 1643-1654 1380-2224 22:6<1643 2015 22 10934