Experiences with inline feedback control and data acquisition in deep drawing
| LEADER | naa a22 4500 | ||
|---|---|---|---|
| 001 | 528785397 | ||
| 005 | 20180924065518.0 | ||
| 007 | cr unu---uuuuu | ||
| 008 | 180924s2018 xx s 100 0 eng | ||
| 024 | 7 | 0 | |a 10.3929/ethz-b-000286728 |2 doi |
| 024 | 7 | 0 | |a 10.1016/j.promfg.2018.07.401 |2 doi |
| 035 | |a (ETHRESEARCH)oai:www.research-collecti.ethz.ch:20.500.11850/286728 | ||
| 245 | 0 | 0 | |a Experiences with inline feedback control and data acquisition in deep drawing |h [Elektronische Daten] |c [Pascal Fischer, Jörg Heingärtner, Yasar Renkci, Pavel Hora] |
| 260 | |a Amsterdam |b Elsevier |c 2018 | ||
| 506 | |a Open access |2 ethresearch | ||
| 520 | 3 | |a The increasing complexity of parts produced in deep drawing needs an enhanced process design, which results in different methods of the visualization of process windows. With these visualization methods, the process is usually designed to reach wide process window. Due to changing friction through rising temperatures in the tools, tool wear or batch to batch variations in the material, the process window is reduced again. Therefore new methods are needed to keep the process inside the process window. The paper deals with a possible approach of keeping the process inside these windows. The proposed approach tries to unite the measurement of possible influence factors like the batch to batch variation of material properties with a feedback control to eliminate the non-measurable influences. The measurement of the material properties is done by a measurement system based on eddy-currents, while the needed measurement for a feedback control is done with an optical system. Finally the paper will show the experiences with the proposed system, as well as it will show the prerequisites for such a system. | |
| 520 | 2 | |a 17th International Conference on Metal Forming, Metal Forming 2018 in Toyohashi, Japan (September 16-19, 2018) | |
| 540 | |a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International |u http://creativecommons.org/licenses/by-nc-nd/4.0 |2 ethresearch | ||
| 690 | 7 | |a Deep drawing |2 ethresearch | |
| 690 | 7 | |a Control |2 ethresearch | |
| 690 | 7 | |a Material properties |2 ethresearch | |
| 700 | 1 | |a Fischer |D Pascal |e joint author | |
| 700 | 1 | |a Heingärtner |D Jörg |e joint author | |
| 700 | 1 | |a Renkci |D Yasar |e joint author | |
| 700 | 1 | |a Hora |D Pavel |e joint author | |
| 773 | 0 | |t Procedia Manufacturing, 15 |d Amsterdam : Elsevier |g pp. 949-954 |x 2351-9789 | |
| 856 | 4 | 0 | |u http://hdl.handle.net/20.500.11850/286728 |q text/html |z WWW-Backlink auf das Repository (Open access) |
| 908 | |D 1 |a Conference Paper |2 ethresearch | ||
| 950 | |B ETHRESEARCH |P 856 |E 40 |u http://hdl.handle.net/20.500.11850/286728 |q text/html |z WWW-Backlink auf das Repository (Open access) | ||
| 950 | |B ETHRESEARCH |P 700 |E 1- |a Fischer |D Pascal |e joint author | ||
| 950 | |B ETHRESEARCH |P 700 |E 1- |a Heingärtner |D Jörg |e joint author | ||
| 950 | |B ETHRESEARCH |P 700 |E 1- |a Renkci |D Yasar |e joint author | ||
| 950 | |B ETHRESEARCH |P 700 |E 1- |a Hora |D Pavel |e joint author | ||
| 950 | |B ETHRESEARCH |P 773 |E 0- |t Procedia Manufacturing, 15 |d Amsterdam : Elsevier |g pp. 949-954 |x 2351-9789 | ||
| 898 | |a BK010053 |b XK010053 |c XK010000 | ||
| 949 | |B ETHRESEARCH |F ETHRESEARCH |b ETHRESEARCH |j Conference Paper |c Open access | ||