Simulation and experimental analysis of nanoindentation and mechanical properties of amorphous NiAl alloys
| LEADER | caa a22 4500 | ||
|---|---|---|---|
| 001 | 605511101 | ||
| 003 | CHVBK | ||
| 005 | 20210128100649.0 | ||
| 007 | cr unu---uuuuu | ||
| 008 | 210128e20150601xx s 000 0 eng | ||
| 024 | 7 | 0 | |a 10.1007/s00894-015-2714-1 |2 doi |
| 035 | |a (NATIONALLICENCE)springer-10.1007/s00894-015-2714-1 | ||
| 245 | 0 | 0 | |a Simulation and experimental analysis of nanoindentation and mechanical properties of amorphous NiAl alloys |h [Elektronische Daten] |c [Chih-Hao Wang, Te-Hua Fang, Po-Chien Cheng, Chia-Chin Chiang, Kuan-Chi Chao] |
| 520 | 3 | |a This paper used numerical and experimental methods to investigate the mechanical properties of amorphous NiAl alloys during the nanoindentation process. A simulation was performed using the many-body tight-binding potential method. Temperature, plastic deformation, elastic recovery, and hardness were evaluated. The experimental method was based on nanoindentation measurements, allowing a precise prediction of Young's modulus and hardness values for comparison with the simulation results. The indentation simulation results showed a significant increase of NiAl hardness and elastic recovery with increasing Ni content. Furthermore, the results showed that hardness and Young's modulus increase with increasing Ni content. The simulation results are in good agreement with the experimental results. Adhesion test of amorphous NiAl alloys at room temperature is also described in this study. | |
| 540 | |a Springer-Verlag Berlin Heidelberg, 2015 | ||
| 690 | 7 | |a Adhesion |2 nationallicence | |
| 690 | 7 | |a Molecular dynamics |2 nationallicence | |
| 690 | 7 | |a Nanoindentation |2 nationallicence | |
| 690 | 7 | |a NiAl alloys |2 nationallicence | |
| 700 | 1 | |a Wang |D Chih-Hao |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | |
| 700 | 1 | |a Fang |D Te-Hua |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | |
| 700 | 1 | |a Cheng |D Po-Chien |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | |
| 700 | 1 | |a Chiang |D Chia-Chin |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | |
| 700 | 1 | |a Chao |D Kuan-Chi |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | |
| 773 | 0 | |t Journal of Molecular Modeling |d Springer Berlin Heidelberg |g 21/6(2015-06-01), 1-10 |x 1610-2940 |q 21:6<1 |1 2015 |2 21 |o 894 | |
| 856 | 4 | 0 | |u https://doi.org/10.1007/s00894-015-2714-1 |q text/html |z Onlinezugriff via DOI |
| 898 | |a BK010053 |b XK010053 |c XK010000 | ||
| 900 | 7 | |a Metadata rights reserved |b Springer special CC-BY-NC licence |2 nationallicence | |
| 908 | |D 1 |a research-article |2 jats | ||
| 949 | |B NATIONALLICENCE |F NATIONALLICENCE |b NL-springer | ||
| 950 | |B NATIONALLICENCE |P 856 |E 40 |u https://doi.org/10.1007/s00894-015-2714-1 |q text/html |z Onlinezugriff via DOI | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Wang |D Chih-Hao |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Fang |D Te-Hua |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Cheng |D Po-Chien |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Chiang |D Chia-Chin |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | ||
| 950 | |B NATIONALLICENCE |P 700 |E 1- |a Chao |D Kuan-Chi |u Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 807, Kaohsiung, Taiwan |4 aut | ||
| 950 | |B NATIONALLICENCE |P 773 |E 0- |t Journal of Molecular Modeling |d Springer Berlin Heidelberg |g 21/6(2015-06-01), 1-10 |x 1610-2940 |q 21:6<1 |1 2015 |2 21 |o 894 | ||